Discover Why Your Home May Have Low Water Pressure

One of the big problems with the design of modern faucets is that they do not work well with hard water supplies. The modern faucet design easily traps hard water minerals, blocks the water flow and causes low pressure problems. 

Years ago many standard kitchen, bath and shower faucets had rubber and plastic washers that contacted a circular valve seat inside the faucet. When the faucet was opened, the washer created a large area for the water to pass through. In some ways it was probably too much as the amount of water that passed through was huge. This is not good in the modern era of water conservation.

These days many modern faucets have no cartridges inside the body of the faucet. These cartridges replace the washers that were in the older type of faucet. Many modern faucets also have an aerator or a flow restrictor inside as well which have very small holes to add air to the water. The only problem with these new cartridge type faucets is that they create a very small area for the water to pass through and consequently trap any sediment of hardness minerals.

This often creates low pressure from the faucet as small pieces of sediment or other debris clog the passageway within the valve cartridge and/or the tiny orifices within the aerator and or a flow restrictor. This is an extremely common problem for many homeowners.

These low water pressure and flow problems are very common just after a water main break in a municipal water system. Sand, dirt and other debris can enter municipal piping systems when a water main fractures. Once the water main is repaired, this debris is transported through the water system and can end up in your home.

Any debris in the main such as sediment, soldering flux or shavings of pipework can end up in reaching faucets which again can block the flow. This causes a reduction in water pressure and allows hardness materials to build up.

A great way to deal with this is to consider a water filter. The industry standard these days is the reverse osmosis water filter than effectively removes nearly all of the unwanted sediment and debris as well as up to 95% of calcium and magnesium minerals. This not only helps to provide you and your family with pure, clean water but also prevents stubborn hard water stains from forming around the home.

If you require any help deciding on what water filter is the best one for you and your family, drop me an email at support@hardwaterstainstips.com and I'd be happy to point you in the right direction.

Water Softening Benefits to be Studied...

The effect of hard water around the home can increase heating bills by hundreds of dollars a year. Simply adding a water softener is a great way to combat these effects and reduce the build-up of limescale and hard water stains.

The effects of softening water are now being studied at WQA Aquatech USA. The conference and exhibition will be held at the Orange County Convention Center in Orlando, Florida, March 9 - 12, 2010.

One of the best water filters around at the moment is the Pelican PC600 Premium whole House Water Softener. Click on the image below for more information...

The results of the conference will be very revealing and I'm sure will confirm that hard water continues to be an ever increasing evvironmental issue due to the extra energy is costs to heat homes and businesses.

The full article about the conference can be found at http://www.watertechonline.com/news.asp?N_ID=73367

If you have any comments about this post feel free to add them below - I be happy to hear your thoughts.

Hard Water Stains - The Top 7 Worst Things to Remove Hard Water Stains and Limescale

There are some things that should definitely not be used to remove hard waters stains and limescale. They can seriously damage your fixtures and fittings and cause them to look worse than when you first started cleaning!

I have seen many people try to remove hard water stains with just elbow grease. While this is certainly one way to remove them it's not the easiest and can make you feel like you've had a good workout! Using something to scrape the stains off is also a common method or even bleach or other toxic chemicals that can harm your children or pets.

Below are just some of the worst ways to remove hard water stains and limescale from your fixtures and fittings:

Scour pads: these can cause significant damage as the scour pad can scratch the finish of metal faucets, sinks, tubs and toilet bowls.

Pumice stone: while these are slightly less damaging than scour pads, they can still cause a lot of damage to toilet bowls and cause ugly scuff marks on the surface.

Sand paper: this is possibly the worst way to remove hard water stains and limescale and I have seen terrible damage caused to porcelain sinks and tubs by the coarse, abrasive action of sand paper.

Razor Blade: these need no explanation as to why they are completely unsuitable for removing hard water stains. Not only will they destroy any finish that a surface may of have had, they are totally unacceptable to have lying around the house for children to pick up and play with.

Bleach: while this is good to kill bacteria, it just doesn't cut the mustard when it comes to removing stubborn hard water stains and limescale. Some people say it works, but there are easier ways than using a potentially harmful chemical such as bleach.

Hydrochloric Acid: some people have tried strong acids to try and melt off the stains hoping they will just disappear. They sometimes do, but in the process you have just inhaled hydrochloric acid into your lungs...not good.

Chemical Cleaners: there are many on the market these days which we all know about. They do have some success at removing hard water stains. The only thing with these is that again they are potentially harmful if used too much; I know I have ran out of the room gasping for breath more than once in the past! Plus they can be rather expensive for what they actually are.

There are some much easier ways to remove stubborn hard water stains and limescale than this.

There are some tried and tested methods for removing even the most stubborn of hard water stains that have been proven to work that will leave your fixtures and fittings sparkling like new.

To discover the secrets to removing those annoying hard water stains try our popular ebook that has helped hundreds of people on a no risk 30 day trial ...

Hard Water Problems...

Bathroom
Showerheads and spray-nozzles can become blocked; they can even clog the small holes completely and reduce their efficiency. The bathtub and sink seem to be the places where there is a visible soap scum build up. Without proper treatment his build up is very difficult to remove and may require a lot of cleaners and many applications. Scale can clog pipes and can decrease the life of toilet flushing units.

Bathing
Bathing with soap in hard water leaves a film of sticky soap curd on the skin. The film may prevent removal of soil and bacteria. Soap curd interferes with the return of skin to its normal, slightly acid condition, and may lead to irritation. Soap curd on hair may make it dull, lifeless and difficult to manage. Similarly, the insoluble salts that get left behind from using regular shampoo in hard water tend to leave hair rougher and harder to detangle.

Laundering
Clothes washed in hard water often look dingy and feel harsh and scratchy. The hardness minerals combine with some soils to form insoluble salts, making them difficult to remove. Soil on clothes can introduce even more hardness minerals into the wash water. Continuous laundering in hard water can damage fibers and shorten the life of clothes by up to 40 percent.

Dishwashers
When washing dishes, especially in a dishwasher, hard water may cause spotting and filming on your crockery. The minerals from hard water are released faster when it comes into contact with heat, causing an increase in the amount of spotting and filming that occurs. This problem is not a health risk, but it can be a nuisance to clean and reduce the quality of your crockery.

Health Benefits of Hard Water

Hard water is not a health hazard. In fact, the National Research Council (National Academy of Sciences) states that hard drinking water generally contributes a small amount toward total calcium and magnesium human dietary needs. They further state that in some instances, where dissolved calcium and magnesium are very high, water could be a major contributor of calcium and magnesium to the diet.

The World Health Organization says, "There does not appear to be any convincing evidence that water hardness causes adverse health effects in humans." Some studies have shown a weak inverse relationship between water hardness and cardiovascular disease in men, up to a level of 170 mg calcium carbonate per liter of water.

Other studies have shown weak correlations between cardiovascular health and water hardness. The World Health Organization has reviewed the evidence and concluded the data were inadequate to allow for a recommendation for a level of hardness.

In a review by František Kožíšek, M.D., Ph.D. National Institute of Public Health, Czech Republic gives a good overview of the topic, and unlike the WHO, sets some recommendations for the maximum and minimum levels of calcium (40-80 mg/L) and magnesium (20-30 mg/L) in drinking water, and a total hardness expressed as the sum of the calcium and magnesium concentrations of 2-4 mmol/L.