Water Softeners - 3 Critical Things to Consider Before Buying a Water Softener

When considering which water softener to purchase there are some important factors to consider including some significant health issues. This is because water softeners actually use sodium to alter the water. As we all know, sodium is a major cause of increased blood pressure and other serious health problems.

Sodium is an essential mineral because it's necessary for fluid and electrolyte balance in your body. However, consuming too much salt (also known as sodium chloride) may lead to high blood pressure, a condition called hypertension.

How Do Water Softeners Work:
Water softeners or whole house water treatment systems use a process called ion exchange to remove minerals from a water supply before it enters the home. This involves passing the water through a tank filled with resin beads that are coated with ions of either sodium or potassium chloride.
In simple terms, the sodium or potassium ions in the water softener swap places with the calcium or magnesium ions (which are the hard minerals that cause hard water stains and limescale) in a domestic water supply.

What To Consider Before Purchase:
• Firstly, sodium chloride is usually less expensive than potassium chloride although the latter is better for the environment. This is because the system has to have the brine solution discharged to recharge the ions on the resin beads.
• If the potassium solution is discharged it has less impact on the environment and can actually be put on lawns as potassium is a key plant nutrient!
• Contrary to a common misconception, using sodium salt in your water softener will not adversely affect your plumbing. Most modern plumbing is made of PVC plastic and is not affected by increased levels of either sodium or potassium chloride. Sodium salt can, however, reduce the amount of maintenance required for your brine tank.
• For those concerned about the health issues of how much sodium is put into the water by a water softener, the answer is, it all depends. The harder your water supply the more sodium ions are needed to soften it. That said, studies indicate that even water softened with sodium chloride has a low concentration of sodium.
• The costs of water softeners are usually far outweighed by the benefits and cost savings obtained, through using softened water.
Your local health department can tell you the sodium and other mineral content of your community's water supply.

Options if Your Tap Water is High in Sodium:
• Consider switching to another type of water-purification system.
• Buy demineralized water for drinking and cooking.
• Softening only the hot water and using unsoftened cold water for drinking and cooking.
Ultimately the choice between sodium or potassium salts in your water softener is a personal one, depending on the presence of potential health issues with your water supply, cost, and environmental priorities.

Whichever one you decide on, the advantages of a water softener far outweigh the disadvantages. As well as all the above they can also be helpful in reducing cleaning time by preventing hard water stains and limescale forming around the home.

One of the best water softeners on the market is the 5 stage under water filter system from Crystal Clear Supply. To learn more about the recommended water softener click here or on the image below:

Hard Water Stains - The Top 7 Worst Things to Remove Hard Water Stains and Limescale

There are some things that should definitely not be used to remove hard waters stains and limescale. They can seriously damage your fixtures and fittings and cause them to look worse than when you first started cleaning!

I have seen many people try to remove hard water stains with just elbow grease. While this is certainly one way to remove them it's not the easiest and can make you feel like you've had a good workout! Using something to scrape the stains off is also a common method or even bleach or other toxic chemicals that can harm your children or pets.

Below are just some of the worst ways to remove hard water stains and limescale from your fixtures and fittings:

Scour pads: these can cause significant damage as the scour pad can scratch the finish of metal faucets, sinks, tubs and toilet bowls.

Pumice stone: while these are slightly less damaging than scour pads, they can still cause a lot of damage to toilet bowls and cause ugly scuff marks on the surface.

Sand paper: this is possibly the worst way to remove hard water stains and limescale and I have seen terrible damage caused to porcelain sinks and tubs by the coarse, abrasive action of sand paper.

Razor Blade: these need no explanation as to why they are completely unsuitable for removing hard water stains. Not only will they destroy any finish that a surface may of have had, they are totally unacceptable to have lying around the house for children to pick up and play with.

Bleach: while this is good to kill bacteria, it just doesn't cut the mustard when it comes to removing stubborn hard water stains and limescale. Some people say it works, but there are easier ways than using a potentially harmful chemical such as bleach.

Hydrochloric Acid: some people have tried strong acids to try and melt off the stains hoping they will just disappear. They sometimes do, but in the process you have just inhaled hydrochloric acid into your lungs...not good.

Chemical Cleaners: there are many on the market these days which we all know about. They do have some success at removing hard water stains. The only thing with these is that again they are potentially harmful if used too much; I know I have ran out of the room gasping for breath more than once in the past! Plus they can be rather expensive for what they actually are.

There are some much easier ways to remove stubborn hard water stains and limescale than this.

There are some tried and tested methods for removing even the most stubborn of hard water stains that have been proven to work that will leave your fixtures and fittings sparkling like new.

To discover the secrets to removing those annoying hard water stains try our popular ebook that has helped hundreds of people on a no risk 30 day trial ...

Another Award For Hard WaterStainsTips.com - Submission to BestEzines

Good News! We are very proud to have been recently submitted to Best Ezines.com - "The Email Newsletter Review & Ezine Award Site." This allows people and subscribers to vote, rate and comment on the quality of ezines they receive.

We've helped hundreds of people over the last few years remove the stubborn hard water stains and limescale that build-up all around the home. We have received lots of positive feedback and emails - which we are always happy to receive.

So, we would be very grateful if you have found the hints and tips here on this blog site and via our regular emails useful to leave a comment with BestEzines.com - which will allow other people to benefit from the hints and tips we provide here at HardWaterStainsTips.com and combat the effects of hard water.

If you would like to vote and rate us or leave a comment about HardWaterStainsTips, go to:

http://bestezines.com/?Hard-Water-Stains-Tips&id=13879 and leave your comment.

Thank you.

Are you not yet a subscriber to our emails? Like what you've read? Sign up for our FREE report and get future issues delivered straight to you: http://www.hardwaterstainstips.com

Top Shaving Tips - 10 Razor Sharp Tips For the Perfect Shave - Even in Hard Water Areas!

Achieving a close shave is a fine art, but can be difficult to pull off, especially in hard water areas, which contain high levels of calcium and magnesium. Water containing these minerals can cause a morning shave to result in unsightly cuts, nicks and skin burn.

The perfect shave is what all men strive for every morning when they bring their razor up their chin, an effortless shave that's baby smooth, and without any of the usual skin irritation, redness, and that burning sensation most guys seem to feel is par for the course when it comes to shaving.

However, living in a hard water area can make this perfect shave tricky and can cause irritating razor drag leading to an uncomfortable shave and even nicks and cuts. This is because the minerals in hard water actually prevent soaps and shaving products forming a good lather. Many people around the world have the same problem, especially in the US where 80% of the water is classed as hard.

Here are 10 proven tips for a great shave, even in hard water areas:

1. Allow at least ten minutes from getting out of bed in the morning to beginning to shave.
2. Use a facial scrub to remove any dead skin and dampen your face with warm water, before starting to shave. A face cloth is ideal.
3. Use a good quality pre-shave oil which will lubricate your face, providing the perfect base for a close comfortable shave, reducing razor burns, rashes and blotchy skin.
4. Always use a shaving brush - work the brush into your shaving soap.
5. Lather the face in a circular motion to lubricate the skin and get under the beard stubble.
6. Ensure that you use a sharp blade.
7. Shave with the grain of the hair on your face, shaving against the grain can cause redness, razor burn and rashes.
8. Rinse the head of your razor in warm water after every stroke.
9. After you have finished your shave, rinse your face in warm water
10. Apply an after shave balm or moisturizer, to sooth and protect the face.

As mentioned above, if you live in a hard water area, the above techniques are extremely difficult to put into practice. Many people instead resort to using bottled or distilled water when shaving to get a good lather making the above tips much easier. However, this can start to be expensive if shaving every day! There are some great shaving products that can prevent nicks and cuts that hard water causes. Click here to learn more...

Another top tip is to install a water softener or filter that removes all of the troublesome hard water minerals (the calcium and magnesium) from the water. Once removed from the water a thick lather can be formed increasing the chances of a flawless shave every time.

Water Testing - Top Tips on How to Easily Discover What's Actually in Your Water Supply

The fact is that your water supply may contain many potentially harmful contaminants and they can be easily tested for - so why not literally test the water? It may help you and your family to discover what is really in there...!

I know many people who have wondered what is actually in their home water supply. We tend to assume the water is clean or pure unless there is an obvious odor or discoloration present.

However as many people know, nearly all water contains contaminants (dissolved minerals or organic compounds). Whether a contaminant is a problem depends on how much is contained within the water and whether it poses a health risk to you and your family.

1. Some contaminants, such as iron and manganese, are an annoyance but not a health threat. Excessive amounts of iron in water can cause orange stains to form on bath tubs and sinks and also laundry or dishes that are frequently exposed to the water.
2. Manganese can result in an ugly brownish-black stain and can cause water to turn cloudy - again it's not a health hazard though.
3. Other nuisance compounds such as hydrogen sulphide and sulphate-reducing bacteria can give a distinctive rotten egg odor. Hydrogen sulphide is especially noticeable when running water from the tap, however after exposure to the air it evaporates quickly. However, the problem with high hydrogen sulphide levels is that it can cause corrosion to pipes due its acidic nature.
4. Hard water, with high levels of calcium and magnesium compounds, can be a particular pain. Soap not lathering well is one indication of hard water. Other clues include greasy, grimy rings in tubs and sinks or dingy laundry with a harsh feel. The excessive calcium and magnesium cause scale that can build up in water heaters and clog pipes causing major problems that require several hundred dollars of repair work.
5. High levels of chlorine can also be a problem and can give water a distinctive "chemical" taste. While chlorine is an effective disinfectant and kills most bacteria, high residual amounts have been associated with cancer causing compounds and other potential health hazards.

However, the frightening concern arises from the possibility that harmful contaminants can be present without any clear sign that there's a problem. Low pH causes corrosion of copper pipes, resulting in high copper levels. Excessive sodium in water can result in significant problems for residents battling hypertension. Many people worry about what is contained in their water because:

• They are concerned about the sodium content it may contain and how it may affect their blood pressure.
• Their water supply has a strange smell.
• They have ugly hard water stains and limescale build up due to hard water minerals.
• It has a faint taste of bleach.
• They just want the best quality water possible for themselves and their family.
• They have discoloured water or cloudy water.

The Easy Solution:

Fortunately, there are some easy ways to ensure that water supplies are safe - performing periodic laboratory analysis is a simple way to ensure your water quality meets the highest standards. For public water systems, testing is done on a regular basis.

Federal law requires water utilities to regularly monitor and test the water to ensure a safe supply to customers. The testing results are public information and freely available. If you'd like to find out the state of the water in the area you live in, you can find out just how hard or soft the water is by contacting the water company in your particular area, they should be able to let you know. This doesn't ensure that problems are eliminated within your household system, but it does ensure monitoring by the supplier.

Private Wells:

Residents with private wells should definitely test their water to monitor its quality. Private well owners are solely responsible for the safety of their wells and any recommended testing. A laboratory analysis of your water supply will provide you with the information needed to take immediate and long-term corrective measures, if necessary, to provide a suitable and safe water supply.

If you have a private water supply, you can easily have the water tested for hardness and check whether your water contains the minerals that cause hard water stains and limescale. Most water testing laboratories offer hardness tests for a fee, including the Environmental Quality Center. Also many companies that sell water treatment equipment offer hardness tests. When using these water tests, be certain you understand the nature of the test, the water condition being measured, and the significance of the test results. An approximate estimate of water hardness can be obtained without the aid of outside testing facilities.

If you prefer to do it yourself there are a number of water hardness testing kits that are available for purchase through water testing supply companies.

However, if more accurate measurements are required, it is advisable to contact an authorized testing laboratory.

To learn more click here...